Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateStyles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Summerlin?
Hardwood floor refinishing in Summerlin typically costs $1,800 to $5,000 for a 500 to 800 square foot project, and most jobs fall inside that range once the square footage, the number of coats and the condition of the existing floor are set. That’s the installed price for sanding, staining and finishing an existing wood floor rather than replacing it. Refinishing from about $3 per square foot is the starting point, and the written estimate after we see the floor is what sets the final number.
If you’re weighing refinishing against a tear-out, the story is usually simple: keeping the floor you already have costs less than new wood and keeps the material out of a landfill. Our technicians have up to 9 years of experience handling both sides of that decision, and we’re glad to walk through your options with you at no charge. Call (844) 320-6715 for a free estimate. We answer 24/7.
Key Takeaways
- Typical lot: $1,800 to $5,000 for a 500 to 800 square foot refinishing project in Summerlin.
- Per-square-foot starting point: about $3, with the final figure set by the written estimate.
- Refinishing versus replacement: new hardwood installation runs $4,500 to $12,000, so refinishing is often the smarter spend when the boards are solid.
- Free estimates: no charge to look at the floor and put a number in writing.
Hardwood Floor Refinishing Cost Breakdown (2026)
Here’s what the pieces of a typical Summerlin refinishing job look like in 2026. These are estimated ranges for a 500 to 800 square foot project, and they’re meant to help you plan, not to lock in a price.
| Line Item | Typical Estimated Range |
|---|---|
| Sanding and prep (full floor strip, edge and corner detail) | $700 – $1,900 |
| Stain application (single color, even blend) | $300 – $900 |
| Finish coats (protective topcoats, traffic areas) | $500 – $1,400 |
| Screen-and-recoat (light refresh, no deep sanding) | $400 – $1,200 |
| Minor board repair and gap filling | $250 – $1,500 |
| Full project, 500 to 800 sq ft | $1,800 – $5,000 |
Where do those numbers move? Square footage is the biggest driver, but it isn’t the only one. A floor with heavy wear, pet marks or a worn finish that has gone down to bare wood needs a deeper sand, which adds labor. A stain color change takes more passes than a clear coat over the same tone. And rooms with lots of corners, closets, stair nosings or doorways take more hand work than an open living area of the same square footage. The written estimate sets the final price once we’ve seen the actual floor.
Refinishing is worth comparing against the alternative. New hardwood installation in Summerlin runs $4,500 to $12,000 for a similar size project, and it doesn’t include hauling out the old floor. When the boards are solid and the wear layer is thick enough, refinishing comes in well below that and gives you a floor you already know the feel of.
What Affects Hardwood Floor Refinishing Pricing in Summerlin
Summerlin sits in a high desert valley, and that shapes what a refinishing job involves here in ways that don’t show up in a generic price list. The air is dry most of the year, the sun comes in hard through west- and south-facing windows, and homes here tend to run with the windows open in spring and the HVAC working hard in summer. Each of those has a real effect on wood floors and on how a refinishing job gets planned.
- Square footage and layout. The price scales with the area being refinished, and an open great room is cheaper per square foot than four small bedrooms with closets and hallways, because tight spaces take more edge work and more passes with hand tools.
- Condition of the existing finish. A floor that’s just lost its sheen can often take a screen-and-recoat, which is the lighter end of the range. A floor worn down to bare wood, with water marks or deep scratches, needs a full sand and possibly a board repair before any finish goes down.
- Wood thickness and species. Not every floor can be refinished, and some can only be sanded lightly. Whether yours qualifies, and whether a stain color can be matched to a sample, depends on how much wood is left above the tongue and the overall condition. We check that at the estimate visit, and it’s one of the most important things to know before you commit.
- Number of finish coats and stain work. A clear finish in a natural tone is the simplest job. A custom stain, a color change, or extra protective coats over high-traffic areas add to labor and materials, and the product instructions and the written estimate set the schedule.
- Dry desert air and sun exposure. Wood in Summerlin moves with the seasons, and the dry summer air plus strong sun through glass can dry out a floor and fade a finish faster on the sunlit side of a room. That affects finish choice and how much sun protection makes sense, and it’s a conversation worth having before the first sanding pass.
- Prep, transitions and trim. Furniture moving, baseboard protection, doorway transitions to tile or carpet, and stair work all add to the job. Stairs in particular take more time than flat floor of the same footprint.
None of these are reasons to skip the work. They’re the reasons a written estimate beats a phone quote. A number taken over the phone can’t see the wear layer or count the closets, and the written estimate is the one that holds.
How to Save on Hardwood Floor Refinishing
There’s no secret coupon here, but there are real ways to keep the number at the lower end of the $1,800 to $5,000 range without cutting corners on the finish itself.
- Refinish before the finish fails completely. A floor that still has some finish left can often take a lighter refresh instead of a full deep sand. The longer you wait, the more likely the job moves to the top of the range.
- Do the whole floor at once. Refinishing room by room over several years means paying for setup and sanding multiple times. One visit for the full area is usually the better value.
- Keep the color you already have. A color change takes extra passes to blend evenly. If you like the tone, a clear finish keeps labor down.
- Clear the rooms ahead of time. Furniture and rugs moved out before the crew arrives saves labor hours that otherwise get billed into the job.
- Deal with small board repairs early. A loose board or a water-stained plank is cheaper to fix while the floor is already open for sanding than to come back for later.
- Get the estimate in writing and compare line items. A free estimate that breaks out sanding, stain and finish lets you compare fairly and see where the money is actually going.
We’ll put all of that in a written estimate at no charge. Call (844) 320-6715 and we’ll set up a time to look at the floor. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Summerlin Homeowners Choose Refinishing Over Replacement
Most of the hardwood we see in Summerlin homes is worth saving. Solid or thick-engineered boards, a floor that’s level and quiet underfoot, and a color the homeowner still likes are all signs that refinishing is the right spend. Replacement makes sense when the boards are thin, cupped, water-damaged beyond sanding, or when you want a different species or plank width entirely. We install new hardwood too, so we’re not steering you toward refinishing out of convenience. We’ll tell you which side of the line your floor is on.
Refinishing also keeps the character of a floor that a new one can’t copy. Older planks have a grain and wear pattern that new wood takes years to develop, and sanding and finishing brings that back without tearing anything out. It’s a restoration, not a downgrade.
If your home has hardwood in some rooms and carpet or tile in others, refinishing the wood can be the moment to think about the whole floor plan. Nine brands. One specialty. We supply and install carpet, tile and hardwood from Shaw, Mohawk, COREtec, Pergo, LifeProof, Mannington, Armstrong, Daltile and Karndean, so the recommendation is driven by your rooms and how you live in them, not by what happens to be in stock. You can see how we approach the full range of work on our Flooring Summerlin page, and read more about the neighborhoods we serve on our Summerlin page.
What a Refinishing Job Actually Involves
Understanding the steps helps you read an estimate and know what you’re paying for. Here’s the general shape of the work, without turning it into a DIY lesson, because sanding a floor and applying finish is a job for trained hands.
- Assessment. We check the wear layer, look for cupping, gaps or water damage, and confirm the floor can be sanded. This is where we tell you whether refinishing is viable or whether replacement is the better call.
- Prep and protection. Furniture out, baseboards protected, doorways sealed to keep dust contained. Dust control is a big part of a clean job.
- Sanding. A series of passes with progressively finer grit to take off the old finish and smooth the wood. This is the most labor-intensive part and the one most affected by square footage and layout.
- Stain, if chosen. Applied for an even tone. Color matching to a sample depends on the species and the wood’s natural tone, and we’ll tell you honestly what’s achievable.
- Finish coats. Protective topcoats that give the floor its sheen and its resistance to daily wear. The number of coats and the product are set by the written estimate and the product instructions.
- Cure and walk-through. The floor needs time to cure before furniture goes back, and that timing depends on the product and the home. We’ll tell you what to expect before we leave.
A note on safety: the finish products used in refinishing and the dust from sanding call for proper ventilation and protective equipment. That’s one reason we keep the sanding and finishing in trained hands rather than treating it as a weekend project. If you’re considering doing any of it yourself, the risk to your floor and your health isn’t worth the savings.
Refinishing vs. Other Flooring Options in Summerlin
It helps to see refinishing next to the other numbers so you can plan a bigger project. Here’s how the typical installed ranges compare for a 500 to 800 square foot project:
- Carpet installation: $1,500 – $5,000 (carpet with pad from about $3 per square foot)
- Tile flooring installation: $3,000 – $9,000 (tile from about $7 per square foot)
- Hardwood floor refinishing: $1,800 – $5,000 (from about $3 per square foot)
- Hardwood floor installation: $4,500 – $12,000 (hardwood from about $8 per square foot)
- Vinyl plank flooring installation: $2,400 – $6,500 (vinyl plank from about $4 per square foot)
- Laminate flooring installation: $1,800 – $5,500 (laminate from about $3 per square foot)
- Floor repair: $250 – $1,500 (per job)
Each of those ranges is a typical installed price for that size project, and the price per square foot depends on the product, the room and the subfloor. For any of them, the written estimate sets the final price. If you’re refinishing hardwood in one room and wondering what to do in the next, we can talk through tile, carpet and the rest in the same visit so the whole home makes sense together.
FAQs – Hardwood Floor Refinishing Cost
How much does hardwood floor refinishing cost in Summerlin?
Hardwood floor refinishing in Summerlin typically costs $1,800 to $5,000 for a 500 to 800 square foot project, with a per-square-foot starting point of about $3. The final figure depends on square footage, floor condition, stain and finish choices, and the written estimate sets it. Call (844) 320-6715 for a free estimate.
Is it cheaper to refinish hardwood or replace it?
Refinishing is usually cheaper than replacement: typical refinishing runs $1,800 to $5,000, while new hardwood installation runs $4,500 to $12,000 for a similar size project. Replacement only wins when the existing boards are too thin or damaged to sand. We’ll tell you which side your floor falls on. Call (844) 320-6715 for a free estimate.
Can every hardwood floor be refinished?
No. Whether a floor can be refinished depends on how much wood is left above the tongue and the overall condition, and some floors can only take a light sand. We check this at the estimate visit, and if refinishing isn’t viable we’ll say so and walk through replacement. Call (844) 320-6715 to book a look at your floor.
What does a screen-and-recoat cost compared to a full refinish?
A screen-and-recoat typically runs $400 to $1,200, compared with $1,800 to $5,000 for a full sand and refinish of a 500 to 800 square foot area. The lighter option works when the finish has dulled but the wood underneath is sound. Call (844) 320-6715 and we’ll tell you which one your floor needs.
How much does hardwood floor refinishing cost per square foot in Summerlin?
Refinishing starts at about $3 per square foot in Summerlin. The exact per-square-foot cost depends on the product, the room and the subfloor, and the written estimate sets it. Call (844) 320-6715 for a free estimate based on your actual square footage.
How long does a refinishing job take?
The schedule is set at the estimate, since it depends on square footage, the number of coats and the product’s cure time. We’ll give you a clear timeline in the written estimate before any work starts. Call (844) 320-6715 to get on the schedule.
Can you match a stain color to my existing floor?
Sometimes. Whether a stain can be matched to a sample depends on the wood species and its condition, and we’ll tell you what’s achievable at the estimate visit rather than promising a match we can’t deliver. Call (844) 320-6715 to talk through the color you have in mind.
Free Estimates and Getting on the Schedule
If you’ve been putting off a refinishing decision because you don’t know what it will cost, the fastest way to end that is a free estimate. We’ll look at the floor, talk through options, and put a number in writing. The price is set per job, the estimate costs nothing, and there’s no pressure to book on the spot. Call (844) 320-6715. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The team at Flooring Summerlin is ready to help you decide whether to refinish what you have or start fresh, and to do the work right when you’re ready.
Pricing reflects the Summerlin market as of 2026. Flooring Summerlin offers free estimates – call (844) 320-6715.
Written by the team at Flooring Summerlin.
What Our Customers Say
"Sanded and refinished the hardwood in our hallway and two bedrooms. The dust control was better than I expected, and the grey traffic path by the front door is gone."
- Luis Rodriguez"Replaced about a dozen damaged boards in an older hardwood floor and the new ones blend in so well I had to ask him which ones they were."
- Henry Yang"Good install and a clean job site every evening. The crew arrived about an hour after the window they gave me, so be ready for a bit of flexibility on the start time."
- Javier Vargas